Hydroponics

  • Build An LED Grow Light For Seedlings and Cuttings
    Introduction Watch the video above to see how to build a cheap LED grow light for your seedlings or cuttings.  This light is more energy efficient than a shop light or cfl bulb.  This light is perfect for a 10 inch X 20 inch seedling tray. Parts Used   Configuration for cuttings This configuration is … Continue reading →
  • Hydroponics Nutrient Solution EC and PH Charts
    Introduction Here is a chart that gives guidance on nutrient strength and PH for several different plants.  For EC I like to mix on the lower side of the range.  For PH I like to be in the middle of the range. Here’s an EC/tds and ph meter set you can buy: TDS/EC and PH … Continue reading →
  • DIY: Build A Four Plant Top Feed Hydroponic Garden
    Introduction This Howto describes building a 4 plant hydroponic garden. The method being used is a top fed drip system. Th nutrient solution flows out the ends of 1/4 inch tubing. Parts List *A square bucket with lid. (my container is from cat litter. approx 5 gallons) *A 105GPH fountain pump *5 feet of 1/4 … Continue reading →
  • DIY: Build Your Own PVC Bulkhead Fitting
    Introduction It is a straight forward process to build your own bulkhead fitting. A trip to the hardware store will yield all the parts you are looking for. I’m going to describe building a bulkhead fitting for 1.5 inch pvc pipe. Although with the information I’m presenting you should be able to build a bulkhead … Continue reading →
  • DIY – Build a Flood and Drain / Ebb and Flow Hydroponics System
    Thease videos cover building an ebb and flow hydroponic system. This has been one of my better performing systems. I have nice looking roots without any disease problems. I hope you build one.